維護保養服務
常青以原廠技術提供售後技術服務，涵蓋定期保養、設備升級改造與模組化系統整合，保障您的設備投資效益，確保分條產線持續穩定運行。
服務項目範圍
-
機構系統檢查
系統性檢視發送系統、分切刀座、收捲軸、壓輪及跳動輪，並依原廠公差標準評估易耗件狀態。 -
驅動與張力控制
驅動器調校、張力迴路校準、收放捲區段扭矩驗證，並進行 PLC 參數檢查及伺服驅動器健康診斷。 -
氣動與電氣系統
氣壓源檢視、電磁閥狀態確認、感測器對位及 I/O 診斷，並依原廠設計邏輯驗證安全聯鎖迴路。 -
故障診斷與緊急維修
依原廠控制邏輯追查根本原因，避免治標不治本。針對高稼動率產線，快速回應以縮短停機時間。 -
操作人員技術指導
現場審查機台操作方式、換料程序及收捲參數設定，從源頭降低因製程不一致造成的設備耗損。
常青服務優勢
-
原廠技術
常青工程師熟悉機台完整機構與電控架構，能直接追查問題根源，而非停留在表面症狀處理。 -
合規維護
所有保養作業與零件更換均依原廠規範執行，確保設備精度、張力重複性與複捲幾何尺寸維持原有水準。 -
保養紀錄作為升級基礎
每次保養均建立結構化設備狀態紀錄，作為後續升級改造的技術基準，有效降低工程評估成本與範疇風險。 -
第三方設備服務
常青接受其他品牌分條複捲機的服務委託，無論機台來源，皆可由常青團隊進行評估與維修。
適合對象
常青設備現有用戶
高稼動率分條產線
交期要求嚴格之產線
要求高 OEE 的生產操作
「維護保養不是成本中心，而是額定產能與實際可持續產能之間的緩衝。隨著設備每年承受更長運轉時數、更高線速與更頻繁的材料切換，例行檢測與保養直接決定一條產線是否能持續穩定交付。」
Maintenance
Nicely provides after-sales technical services using original factory engineering — to protect your equipment investment and maximize line uptime.
Preventive Maintenance & Field Service
Nicely's maintenance program is built on original factory engineering expertise and systematic service protocols. We perform scheduled inspections, predictive maintenance, and failure-risk assessments to keep your slitter rewinder running at rated speed and tension accuracy — eliminating unplanned downtime before it happens.
Scheduled Inspection ｜ Preventive Maintenance | Failure-Risk Assessment
Service Coverage
-
Mechanical inspection
Systematic check of unwind brake systems, slitting stations, rewind shafts, nip rollers, and dancer assemblies. Wear parts evaluated against original tolerances. -
Drive & tension control
Drive tuning, tension loop calibration, and torque verification across winding and slitting zones. PLC parameter review and servo drive health check. -
Pneumatic & electrical systems
Air circuit pressure testing, solenoid valve condition, sensor alignment, and I/O diagnostics. Safety interlock verification against original design logic. -
Fault diagnosis & emergency repair
Root-cause diagnosis using factory control logic — not symptomatic fixes. Rapid response to minimize stop time on high-utilization lines. -
Operator guidance
On-site review of machine operation practices, material changeover procedures, and winding parameter settings. Reduces equipment wear caused by process variation.
Nicely Advantage
-
Factory engineering insight
Nicely engineers understand the full mechanical and electrical architecture of the machine — not just the symptoms. Problems are traced to root cause, not patched at the surface. -
Original specification compliance
All maintenance work and part replacements follow original factory specifications, preserving dimensional accuracy, web tension repeatability, and rewind geometry. -
Service record as upgrade foundation
Each maintenance visit generates a structured condition log. This record becomes the technical baseline for any future upgrade or retrofit — reducing engineering cost and scope uncertainty. -
Third-party machine service
Nicely accepts service requests for slitter rewinders from other manufacturers. Any machine can be evaluated and serviced by our team.
Suitable for
Existing Nicely equipment users
High-utilization production lines
Lines with strict delivery lead times
Operations requiring high OEE
"Maintenance is not a cost center — it is the capacity buffer between your rated speed and the speed you can actually sustain. As machines run longer hours, faster line speeds, and through more material changes each year, routine inspection directly determines whether a line can deliver, consistently."